Impinj

Mexico has certified the Impinj Speedway reader to be used by state agencies in the electronic vehicle registration initiative beginning in Mexico in July 2010.

In 2005, Impinj began working with Intel to develop RFID chips that would allow for "Processor Secured Storage."

Impinj created two new chips for the project: Monza X-2K Dura and Monza X-8K Dura,

which allow for increased theft deterrence and wireless configuration of electronic devices. The chips will be used in Intel's Microsoft Windows 8-based processors for tablet computers, which will be released in the second half of 2012.

Impinj developed the Monza X chips through a partnership with Intel that began in 2005.

Impinj created the Monza X-2K and Monza X-8K Dura chips with lockable memory blocks and two independent antennas, which allow the chips to be read by both near field and long range readers.

Intel will be using the Monza X chips in Microsoft Windows 8-based processors for tablet computers, to be released in the second half of 2012.

Speedway RFID readers

Speedway is a registered trademark of Impinj. Speedway products include Speedway Revolution RFID Reader and Speedway xPortal RFID reader.

The Speedway RFID reader was first introduced in 2005 as the first RFID reader sold by Impinj. Designed to meet the RFID Gen 2 standards, Speedway was one of Impinj's GrandPrix products alongside Monza.

The Speedway Revolution RFID reader was introduced in 2009. The Speedway Revolution is 80% smaller than the original Speedway RFID reader, measuring 6.75 x 5.5 x 1 inches.

The Speedway Revolution introduced Autopilot technology, which enables the reader to reconfigure itself as the environment shifts.

Introduced in 2010, the Speedway xPortal is a RFID fixed reader that combined the Speedway Revolution with Dual-Linear Phased Array technology, with a smaller design than previous reader portals. Whereas previous portal readers weighed about 150 lbs, the Speedway xPortal weighs 6.5 lbs and measures 40.5 x 8.72 x 2 inches.

Indy RFID reader chips

In 2008, Impinj acquired the Intel RFID division, including an Intel-developed RFID reader chip which Impinj renamed Indy R1000. By combining many electrical components on one microchip, RFID reader chips can minimize size and costs of RFID readers. As of 2008, 40 to 50 manufacturers had developed readers using the R1000 chip.

In 2009, Impinj unveiled the Indy R2000 reader chip, with increased performance designed for use in high-end readers for more challenging applications. In 2010, Impinj further expanded their reader chip portfolio by introducing the Indy R500 reader chip, a lower cost chip for applications that don't require high performance.

STP Source Tagging Platform

In 2011, Impinj announced its STP Source Tagging Platform, a combination of a reader and firmware designed for mass encoding of RFID tags. The platform consists of two systems: bulk encoding for tags already attached to items, or in-line encoding before tags are applied to products. The STP platform is capable of encoding 1100 tags per minute in the bulk system, and up to 1750 tags per minute using the in-line system. In 2012, Impinj announced a version 2 release of the STP platform that will enable brand owners and service bureaus to achieve encoding speeds up to 7,500 tags per minute.

Store Performance Simulator

Impinj's Store Performance Simulator (SPS), released in June 2012, is a "Web-based analysis tool"

designed to show retailers how RFID can increase the accuracy of their inventory and positively impact profitability.

A retailer can use SPS's 25 inputs to reflect their particular store and simulate various "what-if" scenarios,

rather than running unfeasible real-world tests.